mbNET.mini

This table gives you an overview of the current available tutorials with a brief description. #MB0V1 : Device restart and Factory settings (https://helpdesk.mbconnectline.com/en/index.php?type=page&urlcode=063275&title=MB0V1--Device-restart-and-Factory-settings) This tutorial shows how-to restart the device and restore defaults. #MB1V1 : Firmware update via the USB interface (https://helpdesk.mbconnectline.com/en/index.php?type=page&urlcode=176900&title=MB1V1--Firmware-update-via...

Tutorial: #MB0V1 : Device restart and Factory settings The mbNET.mini is delivered with the following factory settings: - IP Adress: 192.168.0.100 - Subnet Mask: 255.255.255.0 - Username: admin - Password: The device password can be found on the back of the mbNET.mini Advice: Change unconditionally and without delay the default login information! ------------------------- 1. Device restart (Reset) (#1) 2. Load factory settings (#2) ------------------------- 1. Device re...

Tutorial: #MB1V1 : Firmware update via the USB interface You can update the mbNET.mini directly via the USB interface. The device then automatically recognizes the firmware saved to a connected USB stick. Pressing the Function button starts the firmware update. ------------------------- 1. Preparation (#1) 2. Execution (#2) ------------------------- 1. Preparation - Go to www.mbconnectline.com (http://www.mbconnectline.com) and download the latest firmware version (e.g. "mbNETmin...

Tutorial: #MB2V1 : Function and status LEDs - USB interface - Reset button - Function button - Function/Status LEDs - LAN interfaces 1 – 3 (3 Port Switch) and LAN LEDs - WAN interface und WAN LEDs ------------------------- 1. LEDs (#1) ------------------------- 1. LEDs LED LED colour LED Status Description Pwr (Power) Green off Device power source is switched off or device is not connected to power source/power pack. on Power source is connecte...