mbNET

This table gives you an overview of the current available tutorials with a brief description. 1. Web interface (https://helpdesk.mbconnectline.com/en/index.php?type=page&urlcode=860319&title=Web-interface) This tutorial summarizes Web interface topics. 2. Device restart and Factory settings (https://helpdesk.mbconnectline.com/en/index.php?type=page&urlcode=118895&title=Device-restart-and-Factory-settings) This tutorial shows how-to restart the device and restore defaults. ...

Tutorial: Web interface If you use the mbNET as a classic router, the complete configuration and setup is performed via the Web interface of the device. a) Main Navigation First-level navigation for the operational user interface. b) Subnavigation Second-Level-Navigation c) Display/work area Here, you will perform all the configuration settings. d) Breadcrumb navigation Displays the user and branch within the user interface. e) Help button Link to online ...

Tutorial: Device Restart and Factory settings The default mbNET LAN IP-address and subnetmask are as follows: - IP address: 192.168.0.100 - Subnet mask: 255.255.255.0 The default mbNET user name and password are: - User name: admin - Password: is unique for each device and can be found on the back of the device. Advice: The computer’s network settings must be changed accordingly ------------------------- 1. Device restart (Reset) (#Device restart) 2. Load factory s...

Tutorial: Firmware update via the USB interface The mbNET-device firmware can be uploaded using the USB-ínterface. To do this please follow the procedure below. ------------------------- 1. Preparation (#Preparation) 2. Execution (#Execution) ------------------------- 1. Preparation - Go to https://downloadportal.mbconnectline.com/en/mbnet.html and download the latest firmware version (e.g "mbNET_FW_V712.zip"). - After extracting it, you will find the actual firmware fil...

Tutorial: Function and status LEDs - Function/Status LEDs - WAN interfaces - USB Host 2.0 - Dial Out button - Reset button - Serial port COM2 - LAN ports 1 – 4 4-Port-Switch - Serial port COM1 ------------------------- 1. LEDs (#LEDs) ------------------------- 1. LEDs LED LED colour LED Status Description Fc1 Orange off No data traffic on COM1 - incoming flashes Data traffic on COM1 - incoming Green off No data traffic on COM1 - ...

Tutorial: SIM card This tutorial describes how you can read out the phone number of the SIM card and control the SIM card by using AT commands. The AT commands are a set of commands which are used, among other things, to control certain basic commands of the telephone system, such as dialing a number or hanging up. ------------------------- 1. Over which number can I reach my SIM card? (#Over which number can I reach my SIM card?) 2. Query and configuration of the mobile network provider (...