Earlier articles

Tutorial: Function and status LEDs - USB interface - Reset button - Function button - Function/Status LEDs - LAN interfaces 1 – 3 (3 Port Switch) and LAN LEDs - WAN interface und WAN LEDs ------------------------- 1. LEDs (#LEDs) ------------------------- 1. LEDs LED LED colour LED Status Description Pwr (Power) Green off Device power source is switched off or device is not connected to power source/power pack. on Power source is connected t...

Tutorial: Firmware update via the USB interface You can update the mbNET.mini directly via the USB interface. The device then automatically recognizes the firmware saved to a connected USB stick. Pressing the Function button starts the firmware update. ------------------------- 1. Preparation (#Preparation) 2. Execution (#Execution) ------------------------- 1. Preparation - Go to https://downloadportal.mbconnectline.com/en/mbnetmini.html and download the latest firmware versi...

Tutorial: Device restart and Factory settings The mbNET.mini is delivered with the following factory settings: - IP Adress: 192.168.0.100 - Subnet Mask: 255.255.255.0 - Username: admin - Password: The device password can be found on the back of the mbNET.mini Advice: Change unconditionally and without delay the default login information! ------------------------- 1. Device restart (Reset) (#Device restart) 2. Load factory settings (#Load factory settings) ---------------...

IMEI mbNET.Mini mbNET

SIM card requirements for the mbNET.mini

Described LED status mbNET.mini