mbNETFIX

This table gives you an overview of the current available tutorials with a brief description. 1. Getting started (https://helpdesk.mbconnectline.com/en/index.php?type=page&urlcode=215139&title=Getting-started) This tutorial describes how to setup and configure mbNETFIX. 2. Network segmenting of the same network addresses (https://helpdesk.mbconnectline.com/en/index.php?type=page&urlcode=075797&title=Network-segmenting-of-the-same-network-addresses) Handling networks with same IP...

Tutorial: Getting started The mbNETFIX is a „self-learning“ easy-to-configure industrial firewall. It can be used in both bridge mode and gateway mode. The configuration is made via the USB interface using the software mbNETFIX Manager (not included in delivery). The software can be downloaded for free at https://goo.gl/g6FQDV ------------------------- 1. First configuration of a mbNETFIX (#First configuration of a mbNETFIX) 2. Offline configuration for a mbNETFIX (#Offline configurati...

Tutorial: Network segmenting of the same network addresses Related Documents: - User Manual mbNETFIX: https://downloadportal.mbconnectline.com/en/mbnetfix.html This application describes how to segment IP-Networks where the segmented Networks have the same IP-Address range. See the Example diagram here: The key here is to use the Network NAT and Static Route option of the mbNETFIX. With Network NAT you can create a so called virtual IP-Address Range and with Static Route you can ad...

Tutorial: Network segmenting of dissimilar network addresses Related Documents: - User Manual mbNETFIX: https://downloadportal.mbconnectline.com/en/mbnetfix.html (http://downloadportal.mbconnectline.com/en/mbnetfix.html) This application describes how to segment IP-Networks where the segmented Networks have dissimilar IP-Address ranges. See the Example diagram here: Essentially, with "Static Route" the gateway addresses have to be added to the corresponding IP address ranges. In ou...

Tutorial: Use of SNAT Related Documents: - User Manual mbNETFIX: https://downloadportal.mbconnectline.com/en/mbnetfix.html Use SNAT if the network subscriber to be reached is outside the network area of the sender, has no or an incorrect (inappropriate) gateway entry and can therefore not send a reply to an delivered data packet. 1. SNAT WAN to LAN (#SNAT WAN to LAN) 2. SNAT LAN to WAN (#SNAT LAN to WAN) ------------------------- 1. SNAT WAN to LAN Replaces the sender add...

Tutorial: Access to multiple devices behind the firewall Related Documents: - User Manual mbNETFIX: https://downloadportal.mbconnectline.com/en/mbnetfix.html Example: Both PLCs should be accessible via PC2 via their own IP addresses. Port forwarding (DNAT) is not possible here because especially with a Siemens PLC, the port assignment cannot be made in PC2. 1. Settings of the devices (#Settings of the devices) 2. Settings of mbNETFIX NF1 (#Settings of mbNETFIX NF1) ----------...

Tutorial: Access to individual services behind the firewall Related Documents: - User Manual mbNETFIX: https://downloadportal.mbconnectline.com/en/mbnetfix.html Example: SPS1 (Programmer port 102) and HMI1 (Webserver port 443) should be accessible via PC2. 1. Settings of the devices (#Settings of the devices) 2. Settings of mbNETFIX NF1 (#Settings of mbNETFIX NF1) ------------------------- 1. Settings of the devices - SPS1: IP: 192.168.0.112/24, Gateway: ----- - HM...