mbNET.mini

Tutorial: Device restart and Factory settings The mbNET.mini is delivered with the following factory settings: - IP Adress: 192.168.0.100 - Subnet Mask: 255.255.255.0 - Username: admin - Password: The device password can be found on the back of the mbNET.mini Advice: Change unconditionally and without delay the default login information! ------------------------- 1. Device restart (Reset) (#Device restart) 2. Load factory settings (#Load factory settings) ---------------...

Tutorial: Function and status LEDs - USB interface - Reset button - Function button - Function/Status LEDs - LAN interfaces 1 – 3 (3 Port Switch) and LAN LEDs - WAN interface und WAN LEDs ------------------------- 1. LEDs (#LEDs) ------------------------- 1. LEDs LED LED-Farbe LED-Status Beschreibung Pwr (Power) Green off Device power source is switched off or device is not connected to power source/power pack. on Power source is connected t...

mbNET.mini: Firmware Update via USB Applies to: • mbNET.mini You can update the mbNET.mini directly via the USB interface. The device automatically detects the firmware stored on a connected USB stick. Pressing the Function button starts the firmware update. Attention - Depending on the Firmware version, you must observe the following: - For Firmware Version 2.x.x: To upload the current Firmware version 2.3.5 to an mbNET.mini, at least version 2.3.0 must already be active on it! For...

Transferring a Configuration via USB Applies to: • mbNET.mini Requirements: You need: - The router with the current firmware version. (At least firmware 2.3.0.) - A USB stick formatted to FAT / FAT32 - A configuration file suitable for the router mbconnect24.initial or mbconnect24.mbne You can download the file via the download icon and the selection [Download Configuration to PC] from the portal. Note: - The formats mbconnect24.mbn and mbconnect24.mbnx are no longer in us...