What are the requirements for the migration from V1 to RSP V2?

What are the requirements for the migration from V1 to V2?

Requirements V1 V2 mbDIALUP:

V1 portal access as useradmin
To perform the migration, you must log in as user admin.
Another user, even if they have administrative rights, is not sufficient.
RSP V2 portal access as user admin
To perform the migration, you must log in as user admin.
Another user, even if they have administrative rights, is not sufficient.
mbDIALUP in the current version
see: ➡ Update of mbDIALUP

Device Requirements:

Device Type	Suitable for Migration	Firmware Version minimum:	Note
mbNET HW:02 or higher	yes	7.2.0	➜ FW Update via USB
mbNET.mini	yes	1.3.0	➜ FW Update via USB
mbNET HW:01	yes	3.5.0	➜ FW Update via USB ➜ Product Lifecycle ➜ EOL mbNET HW:01
600 Series	no		➜ Product Lifecycle ➜ EOL MDH600 - MDH 634
mbSPIDER	no		➜ Product Lifecycle ➜ EOL mbSPIDER

CTM must be activated
Make sure that the CTM function is activated on each device that is to be moved (for devices configured via the portal, this is the default setting; you can find more information on this in your device manual).
The device must be able to reach RSP V2
In order for the device to be able to connect to the RSP V2 after the move, it must be able to reach this server,
see also:
➜ FAQ on IP range release in the firewall for European servers
➜ Which ports must be enabled in the firewall?