FAQ2024

How do I determine the hardware version of my device? mbNET: The devices can be roughly categorized based on the front panel: HW: 01 HW: 02 to HW: 05 from HW: 06 Frame of the front panel: yellow Frame of the front panel: gray Frame of the front panel: gray Label of the eighth LED: Err Label of the eighth LED: Stat Label of the eighth LED: Stat Label WAN: black on yellow Label WAN: black on yellow Label WAN: white on red A more accur...

How can I log in to multiple portals or with multiple users simultaneously? Applies to: • all portals For administrative tasks, it can be useful to log in with multiple identities on the same PC or on different servers simultaneously. Example: Server migration from V1 to RSP: - Start a browser - Enter https://vpn2.mbconnect24.net in the address bar - Log in as admin to your V1 account - Start mbDIALUP - Select the server rsp.mbCONNECT24.net (EU) - Log in as admin to your RSP...

mbDIALUP and mbCHECK have recently reported a closed port what is the cause? To check if certain ports are accessible from a Windows system to a specific system, we use a long-established special test routine. We are currently observing that this routine is producing the following outputs even though the systems are well reachable: - Possible outputs in mbDIALUP : - Possible output in mbCHECK : Recent tests have shown that these messages can occur even though the tested ser...

Tutorial: Web Interface Applies to: mbNET, RA70S, mbNET.rokey, RA70K, mbNET.mini, RA50 There are basically three ways to access the web interface of a router: 1. Access the web interface directly from a PC - Connect an Ethernet port of your PC to one of the LAN ports on the router - Configure the IP address of the PC’s network interface to match the LAN IP of the router - Example: If the LAN IP of the router is the default 192.186.0.100, set the IP on the PC to 192.168.0.110 a...