mbNET / mbNET.rokey

mbNET /.rokey: How can I use LAN segmentation?

How can I use LAN Segmentation? Applies to: • mbNET • mbNET.rokey from HW:06 Requirements: - Active license: tec.boost or LAN Segmentation → mbNET /.rokey: How can I activate a device license in the portal? (/791723-) Description - Without LAN segmentation, all 4 LAN ports of the mbNET are equivalent and assigned to one network. The function acts as a 4-port switch. Data packets are passed between the 4 ports. - With LAN segmentation activated, you can configure up to 4 ...

mbNET /.rokey: How can I activate a device license in the portal?

How can I activate a device license in the portal? Applies to: • mbNET • mbNET.rokey Prerequisites: You will need: - One or more license keys for an additional device feature - A device with the required hardware version Examples: - HW:02 or newer for MQTT Bridge - HW:06 or newer for LAN Segmentation - HW:06 or newer for Edge IIoT (see note at the end of the article) - The router for which the license is to be activated must be online and connected to the portal P...

mbNET / .rokey: Transferring a Configuration via USB

Transferring a Configuration via USB Applicable to: • mbNET • mbNET.rokey Requirements: You will need: - The router with the latest firmware version. (At least firmware 8.3.0.) - A USB stick formatted as FAT / FAT32 - A configuration file compatible with the router mbconnect24.initial or mbconnect24.mbne You can download the file from the portal by selecting [Download configuration to PC]. Note: - The formats mbconnect24.mbn and mbconnect24.mbnx are no longer in use. ...

Device restart and Factory settings

Tutorial: Device Restart and Factory settings The default mbNET LAN IP-address and subnetmask are as follows: - IP address: 192.168.0.100 - Subnet mask: 255.255.255.0 The default mbNET user name and password are: - User name: admin - Password: is unique for each device and can be found on the back of the device. Advice: The computer’s network settings must be changed accordingly ------------------------- 1. Device restart (Reset) (#Device restart) 2. Load factory s...

Firmware update via the USB interface

Tutorial: Firmware update via the USB interface The mbNET-device firmware can be uploaded using the USB-ínterface. To do this please follow the procedure below. ------------------------- 1. Preparation (#Preparation) 2. Execution (#Execution) ------------------------- 1. Preparation - Go to https://downloadportal.mbconnectline.com/en/mbnet.html and download the latest firmware version (e.g "mbNET_FW_V712.zip"). - After extracting it, you will find the actual firmware fil...